Drinking Water Systems

Countertop systems are very easy to install on a standard kitchen faucet, and they are easy to relocate to another sink, if needed. These systems do take up countertop space next to the sink and they are always visible. The Countertop systems include the following models, which are ranked from least to most expensive:

• CB-VOC-SC
• CB-As-SC

Below Counter systems are more permanent than the Countertop systems, and are well suited for people who own their own home. The Below Counter systems are mounted under the sink and tap directly into the kitchen cold water supply. The systems are mounted out of sight with only a faucet visible at the sink. The Below Counter systems include the following models, which are ranked from least to most expensive:

• CB-VOC-SB – includes faucet 
• CB-VOC-SB-PID – includes capacity-metered faucet 
• CB-As-SB – includes faucet 
• CB-As-SB-PID – includes capacity-metered faucet

Each of the Systems has a rated capacity in gallons of water filtered. This is the rated capacity of the filter cartridge before the cartridge must be replaced with a new one:

• CB-VOC-SB-PID – Approximately 1,200 gallons 
• CB-As-SB-PID – Approximately 960 gallons 
• CB-VOC-SI – Approximately 750 gallons 
• CB-VOC-SC – Approximately 750 gallons 
• CB-VOC-SB – Approximately 750 gallons 
• CB-As-SI – Approximately 600 gallons 
• CB-As-SC – Approximately 600 gallons 
• CB-As-SB – Approximately 600 gallons

You should consider only the Below Counter systems if you plan to connect an icemaker directly to the system. The systems designated “SI” in the model number are designed for just such applications. However, all of the Below Counter systems can be installed with a T-fitting to allow connection of both a faucet and an icemaker. The Inline systems include:

• CB-VOC-SI
• CB-As-SI

If you have a problem with Arsenic contamination in your water supply, you should only consider using the CBAs series systems:

• CB-As-SI
• CB-As-SC
• CB-As-SB
• CB-As-SB-PID

If you would like to precisely monitor the time to replace your filter cartridge and extend the life of the cartridge, you should consider using the “Extended Life” models:

• CB-VOC-SB-PID
• CB-As-SB-PID

CB Tech Drinking Water Systems are one of the most effective, economical, convenient and reliable home water filters available today. CB Tech products are certified by NSF International to reduce a wide range of contaminants of health concern, as well as aesthetically improve the water. CB Tech Drinking Water Systems reduce MTBE, chlorination by-products, PCBs, chloramine, pesticides, herbicides, heavy metals like lead and mercury, and many other contaminants. Also:

• Beneficial minerals remain in the water.
• Nothing harmful is added to the water.
• A variety of systems are available to suit any budget.
• Healthier, cleaner water is conveniently available right at your kitchen sink.
• Below Counter systems can be attached to a refrigerator or instant hot dispenser.
• Countertop systems are portable and easy to move.
• Multipure water costs about 9 cents per gallon.
• There is a Lifetime Warranty on the stainless steel and plastic housings (provided that the filter be changed at least once a year) and a 1-Year Waranty on the accessories!

Nationally recognized standards established for the drinking water treatment industry confirm that the most effective systems for the removal of both aesthetic and harmful contaminants are those that utilize solid carbon block filters. The densely compacted Solid Carbon Block filter has the ability to micro-strain every molecule of water through microscopic pores. The large surface area allows the water to be in contact with the carbon for a longer period of time, providing greater adsorption of the many different chemicals, pesticides, herbicides and certain heavy metals. Contaminants with a physical size are removed when water passes through the pre-filter, which helps keep the carbon block from clogging prematurely. The developer of the proprietary Solid Carbon Block filter technology, CB Tech, has been a leading manufacturer in the industry since 1970 (the first year Earth Day was celebrated) and has earned a reputation for performance and quality.

Municipalities are required by law to deliver water to your home or business that is considered “safe” by the EPA. That is to say, the municipalities focus on reducing contaminants of health concern that have been specifically identified by the EPA. However, they do not necessarily remove all contaminants that may be present in the water. Also, they generally do not filter treated water to remove tastes and odors. They employ a variety of technologies that typically include some form of disinfection, but the chemicals employed for disinfection (e.g., chlorine or chloramines) leave tap water with a very noticeable taste and smell. Additionally, once the water leaves the treatment plant it must travel through miles and miles of pipes to reach homes and offices, including the water pipes inside your building. There are many opportunities for water to pick up contaminants along the way, and sometimes the disinfection chemicals actually promote the process of leaching contaminants into the water, such as lead. A CB Tech Drinking Water System serves at the point of use to remove contaminants of health concern that may be present in tap water. Afilter removes chemicals like chlorine as well as rust particles, dirt, small living organisms like cysts, asbestos, lead, and much, much more. The water you consume from a CB Tech Drinking Water System is free of unwanted tastes and odors so that you may enjoy fresh, clean drinking water as it was meant to be.

All municipalities are required by the Safe Drinking Water Act to publish reports on the quality of water delivered through their systems. You may locate the water authority for your locale by visiting your local water authorites website or check out two public web sites identified below:

• Environmental Working Group
• United States Environmental Protection Agency

Please contact CB Tech by telephone (1-866-622-9373) or email ([email protected]) with any questions you may have regarding products or to request a price quote.

You should call CB Tech’s Contract Sales Team at 1-866-622-9373. A Customer Service Representative will review your needs and put you in touch with the most appropriate person within CB Tech to assist you.

All drinking water filtration systems are not created equal. Quite simply, CB Tech offers a superior product, and it costs more to design, test, and manufacture a higher performance product. There are many drinking water system choices available to you, and at first glance they may seem comparable. But they are not. Even among companies employing solid carbon block technology in their products, they do not match the proven performance of products. Superior performance equates to a better value for you over the life the product, and it gives you the peace of mind and satisfaction of knowing you are making a safe choice.

CB Tech Drinking Water Systems (MPADC, CB-VOC and CB-As product lines) have been tested and certified by NSF® International under NSF/ANSI Standard No. 53 (Health Effects) as well as No. 42 (Aesthetics Effects).

NSF® is an internationally recognized, not-for-profit, third-party testing organization that tests and certifies products to ensure they meet strict public health standards. Certified water filtration products are tested to verify that they meet certain standards for health and aesthetics. The end result for the customer is the assurance that a system will do what the literature says it will do. Certification by NSF® assures the consumer that:

• Claims of contaminant reduction are true.
• The system does not add anything harmful to the water.
• The system is structurally sound.
• Advertising, literature and labeling are not misleading.
• Materials and manufacturing processes do not change.

To ensure that manufacturers continue to meet these requirements, NSF® conducts unannounced inspections of manufacturing facilities at least once a year. CB Tech Drinking Water Systems are tested under Standard 42 for Aesthetic Effects (taste, odor, and color) and Standard 53 for Health Effects (contaminants that are considered as established or potential health hazards).

CB Tech Drinking Water Systems have been tested and certified by NSF® for the reduction of the following contaminants/substances (*99% is the maximum rate of reduction certified): Contaminants limits set by NSF/ANSI Standard 42 (Aesthetic Effects):

• Chloramine
• Chlorine
• Particulate matter, Class I (0.5 to < 1 micron)

Contaminants limits set by NSF/ANSI Standard 53 (Health Effects):

• Arsenic V (only the CB-As and CB Plus RO systems are certified to reduce Arsenic V)
• Asbestos
• Chlordane
• Cyst (Giardia, Cryptosporidium, Entamoeba, Toxoplasma)
• Lead (pH 6.5, pH 8.5)
• Mercury (pH 6.5, pH 8.5)
• MTBE
• PCB (Polychlorinated biphenyls)
• Toxaphene
• Turbidity
• VOC (Volatile Organic Chemicals):
  • Alachlor
  • Atrazine
  • Benzene
  • Carbofuran
  • Carbon Tetrachloride
  • Chlorobenzene
  • Chloropicrin
  • 2,4-D
  • Dibromochloropropane
  • o-Dichlorobenzene
  • p-Dichlorobenzene
  • 1,2-Dichloroethane
  • 1,1-Dichloroethylene
  • cis-1,2-Dichloroethylene
  • trans-1,2-Dichloroethylene
  • 1,2 Dichloropropane
  • cis-1,3-Dichloropropylene
  • Dinoseb
  • Endrin
  • Ethylbenzene
  • Ethylene Dibromide (EDB)
  • Haloacetonitriles (HAN):

• Haloketones (HK):

• Heptachlor
• Heptachlor Epoxide
• Hexachlorobutadiene
• Hexachlorocyclopentadiene
• Lindane
• Methoxychlor
• Pentachlorophenol
• Simazine
• Styrene
• 1,1,2,2-Tetrachloroethane
• Tetrachloroethylene
• Toluene
• 2,4,5-TP (Silvex)
• Tribromoacetic acid
• 1,2,4-Trichlorobenzene
• 1,1,1-Trichloroethane
• 1,1,2-Trichloroethane
• Trichloroethylene
• Trihalomethanes (TTHM):

• Xylenes (total)

CB Tech Drinking Water Systems have been certified or registered by the states of California, Iowa, and Wisconsin (all the states that regulate drinking water systems).

CB Tech warrants to the original retail customer its DWS and components to be free of defects in material and workmanship for use under normal care.

Yes, you can hand pump or siphon water through the unit during an emergency situation.

Yes. Two of the CB Tech Drinking Water System models (CB-VOC-SI and CB-As-SI) are designed for just such inline applications. Additionally, using a T-connector (not provided with the product), the below counter models (CB-VOC-SB, CB-VOC-SB-PID, CB-As-SB or CB-As-SB-PID) also can be connected to any type of water dispenser or ice-maker.

No, CB Tech Drinking Water Systems leave in the healthy, naturally occurring minerals.

Minerals are totally dissolved in solution and do not have an actual physical size; thus, the minerals pass through the filter unchanged. The materials used in CB Tech Drinking Water Systems are specially selected for their ability to react with the chemicals in the water but not with natural minerals. The ability to leave the natural, healthy minerals in while reducing harmful contaminants was a vital factor in the development of CB Tech’s Solid Carbon Block filter. The medical community has always maintained that certain minerals were essential for a healthy body, and a recent study in the Journal of the American Dietetic Association found that drinking water with high levels of beneficial, healthful minerals may reduce the risk of heart disease.

CB Tech was able to devise a Solid Carbon Block filter whereby certain dissolved impurities, such as lead and chemicals, are adsorbed to the carbon surface by chemical reaction and adsorption. Adsorption (as opposed to absorption) is defined as “the adhesion in a thin layer of molecules to the surface of solid bodies with which they are in contact” (Webster’s Collegiate Dictionary). Thus the Solid Carbon Block can be analogized to a magnet that metal shavings (lead, in the analogy) adhere to.

CB Tech Drinking Water Systems have been tested and certified to reduce Chlorine and Trihalomethanes. However, not all filters certified to reduce Chlorine can reduce Trihalomethanes (although some disreputable companies would have you believe so!). Chlorine is a substance that is relatively easy to remove. But, chlorine that has interacted with organic material to form Trihalomethanes (thus having a completely different molecular structure) is extremely difficult to remove. Consumers must check with the NSF® (or their state health department, if that state certifies water filters) to see if the filter is certified for Trihalomethanes or VOC reduction.

Filter life will vary in direct proportion to the amount of water used and the type and level of impurities in the water being processed. It is recommended that the filter be replaced when the first of the following occurs: (a) the product’s rated capacity is reached; (b) annually; (c) the flow rate diminishes (which occurs when the filter becomes clogged with particulate matter); or (d) the filter becomes saturated with bad tastes and odors. The filters cannot be back flushed or rinsed and used again. Even if your filter is still white and the flow rate is still high, according to EPA and state health department guidelines, filters should always be replaced at least once a year, regardless of capacity.

The biggest problem with hot water is the sloughing off of chemicals/compounds that had been adsorbed. The heat causes the carbon pores to open up, which could result in lead or chemicals being released into the water. And, the carbon would not effectively reduce contaminants in the water. Hot water is usually below 212 degrees, and that isn’t hot enough to alter the raw materials, so there wouldn’t be any damage to the filter itself. If someone does run hot water through the filter, they should immediately run cold water through until the filter cools and then flush the filter for about 3 minutes. The filter then will again perform effectively. And, don’t drink the hot water.

Do not allow water to sit in the drinking water system for extended periods of time (10 or more days) without being used. If the system is to be left unused for more than 10 days, drain all the water from the system and remove the filter. Upon your return, reinstall the filter in the housing and continue use.